Community Stories

Chronostop Part 2 - The Italian Geneve Pentatlon, Lemania Racing & De Ville

dsio
Posts
29,800
Likes
35,759
Part 3 of 4 will be the Seamaster family and should come out on Thursday.

The final part will be weird stuff, and will be next Tuesday.
 
Gast
Posts
4
Likes
7
Merci beaucoup pour tout ces renseignements
Collectionneurs omega et surtout dynamic et chronostop il m'a été très utile voici une photo de mes 146.012
 
20220427_221345.jpg
dsio
Posts
29,800
Likes
35,759
Gast Gast
Merci beaucoup pour tout ces renseignements
Collectionneurs omega et surtout dynamic et chronostop il m'a été très utile voici une photo de mes 146.012
That’s a very cool set, the lemania racing on the left looks like a metallic brown dial, that’s an option I haven’t seen ever before, do you think you could post some more front on photos of that watch?
 
Gast
Posts
4
Likes
7
dsio dsio
C'est un ensemble très cool, la lemania racing à gauche ressemble à un cadran marron métallique, c'est une option que je n'ai jamais vue auparavant, pensez-vous que vous pourriez poster un peu plus de photos de cette montre ?


Je pense que c'est un effet de la luminosité sur ces cadran magnifiques car c'est le gris à gauche voir autre photo
 
20221205_195307.jpg
peatnick
Posts
2,719
Likes
26,537
Can only be a minute late with these

IMG_6338.png


Calibre 920 has only 60 second accumulator

IMG_6339.jpeg
 
Nerves69
Posts
69
Likes
58
Here is my Fume Grey Chronostop DeVille. Awesome dial.
 
IMG_1829.jpeg
gmmy775
Posts
348
Likes
344
dsio dsio


Our journey into the Chronostop model lines ventures into Italy with the Chronostop Pentatlon, also known as the Chronostop Fontana, and the little known Lemania Racing & De Ville variants of this case design. [..]

Visit Chronostop Part 2 - The Italian Geneve Pentatlon, Lemania Racing & De Ville to read the full article.
dsio dsio


Our journey into the Chronostop model lines ventures into Italy with the Chronostop Pentatlon, also known as the Chronostop Fontana, and the little known Lemania Racing & De Ville variants of this case design. [..]

Visit Chronostop Part 2 - The Italian Geneve Pentatlon, Lemania Racing & De Ville to read the full article.
Hi Ashley

Since I suspect there are few people who know more about the Chronostop than you, I will address this technical question to you. I very recently acquired a 145.009 with the standard dial orientation. It runs quite well on the timegrapher, but I still intend to have it serviced before wearing it regularly. I was re-reading your review of the model and I realized that my pusher only executes two functions, not three. The first push starts the chrono hand, and the second push resets it....foregoing the "stop" function. Is this a common problem, and would you know which components are responsible for the failure? I ask, because I would like to source the part(s) before I send it to my watchmaker. I appreciate you taking the time to entertain this request, thank you.

jimmy
 
dsio
Posts
29,800
Likes
35,759
gmmy775 gmmy775
Hi Ashley

Since I suspect there are few people who know more about the Chronostop than you, I will address this technical question to you. I very recently acquired a 145.009 with the standard dial orientation. It runs quite well on the timegrapher, but I still intend to have it serviced before wearing it regularly. I was re-reading your review of the model and I realized that my pusher only executes two functions, not three. The first push starts the chrono hand, and the second push resets it....foregoing the "stop" function. Is this a common problem, and would you know which components are responsible for the failure? I ask, because I would like to source the part(s) before I send it to my watchmaker. I appreciate you taking the time to entertain this request, thank you.

jimmy
Sorry mate I’ve written it slightly incorrectly there and will need to correct it, from memory you press to start, then when you want to stop it you press and hold the pusher which lets you read the time off, then when you release it, it should fly back to the start waiting for the next run. So the “Hold” of the pusher is how you stop, and it should reset on release rather than it being a distinct press.
 
gmmy775
Posts
348
Likes
344
Hi Ashley

Thank you for the update! It works exactly as you just described, and a huge relief for me. You are the most significant figure in the Omega enthusiast world as far as I am concerned. I read all your articles, and always learn more than I anticipated. Take care.

jimmy
 
dsio
Posts
29,800
Likes
35,759
gmmy775 gmmy775
Hi Ashley

Thank you for the update! It works exactly as you just described, and a huge relief for me. You are the most significant figure in the Omega enthusiast world as far as I am concerned. I read all your articles, and always learn more than I anticipated. Take care.

jimmy
Na mate I’m just someone who spends a lot of time learning, reading, trying out unusual watches and writing about them periodically, there are some really important figures in that space including several of our moderators like Bill & Mike and some incredible writers like Erich and the MWO authors, I’m just doing my thing on the edges.
 
gmmy775
Posts
348
Likes
344
I am sure you know the inner space of that world far better than I, so Bill, Mike, Erich, and the MWO authors will be subjects of my research agenda. I must say, you are very humble for someone who seems to be the face of OmegaForums. Good on you
 
Sign up or log in to reply...