Calling all Pocket Watch Buffs

Posts
20
Likes
47
I posted this in another part of the forum and it was suggested I use this thread:

I bought a new seamaster yesterday and the store manager took a long look at an antique pocket watch that I have. He found several pics of them on line, some that were close but not exact. He said it’s in excellent shape. It should be my mother mostly had it in one of those glass pocket watch displays hanging from a chain for many years. It was my mother’s grandfather’s watch. Sorry, not the best pic. I know little of the company and there is not much on the internet about them. I remember my mother showing it to me when I was a kid and eventually she gave it to me. (She was born and raised in Berlin and married my dad after the war and came here, bringing it with her I suppose.)

I had a jeweler look at it once about 10 years ago too. He turned the winder a few clicks and of course it ran. He took the back cover off and looked at the movement and told me not to run it (which I never have) saying it was filthy and needed good cleaning. Someone had inscribed on the inside of the back cover, ‘07’. He said that would have been the date of the last service, which had to be 1907 as it’s just been sitting pretty much since my mother brought it with her.

Anyone on the forum experienced in antique pocket watches and better yet know anything of Laminor? I just know they were a Swiss company and can’t find anything else about them. The store manager from where I bought my watch yesterday is going to send some pics to a friend of his who collects antique pocket watches, I’ll report back anything I may find out.

 
Posts
14,275
Likes
41,131
I posted this in another part of the forum and it was suggested I use this thread:

I bought a new seamaster yesterday and the store manager took a long look at an antique pocket watch that I have. He found several pics of them on line, some that were close but not exact. He said it’s in excellent shape. It should be my mother mostly had it in one of those glass pocket watch displays hanging from a chain for many years. It was my mother’s grandfather’s watch. Sorry, not the best pic. I know little of the company and there is not much on the internet about them. I remember my mother showing it to me when I was a kid and eventually she gave it to me. (She was born and raised in Berlin and married my dad after the war and came here, bringing it with her I suppose.)

I had a jeweler look at it once about 10 years ago too. He turned the winder a few clicks and of course it ran. He took the back cover off and looked at the movement and told me not to run it (which I never have) saying it was filthy and needed good cleaning. Someone had inscribed on the inside of the back cover, ‘07’. He said that would have been the date of the last service, which had to be 1907 as it’s just been sitting pretty much since my mother brought it with her.

Anyone on the forum experienced in antique pocket watches and better yet know anything of Laminor? I just know they were a Swiss company and can’t find anything else about them. The store manager from where I bought my watch yesterday is going to send some pics to a friend of his who collects antique pocket watches, I’ll report back anything I may find out.



Laminor, according to Mikrolisk. Please show us what is inside the case. Your watch is much newer than 1907, according to the information on Mikrolisk. More like 1920s to early 1930s.

 
Posts
4,869
Likes
14,688
No, live high on a hill, with a mote and alligators I never feed.....keeps the peasants and plebes at bay.

About a decade ago, before pot was legalized here (which is a standard opening for Canadian nursery rhymes, by the way) there was a grow-op about an hour from here that dumped donuts in the woods around their property to attract and maintain a significant population of black bears.

Back to watches, have we seen that 3-hander in the top left?
 
Posts
7,922
Likes
57,280
Security by Smith & Wesson? In Canada, even these are illegal!



Y'all will shoot your eye out........(great movie)
 
Posts
7,922
Likes
57,280
About a decade ago, before pot was legalized here (which is a standard opening for Canadian nursery rhymes, by the way) there was a grow-op about an hour from here that dumped donuts in the woods around their property to attract and maintain a significant population of black bears.

Back to watches, have we seen that 3-hander in the top left?


Hamilton 992B with a dial for those needing help counting to 24.😁
US Govt stamp
Circa 1942
 
Posts
7,922
Likes
57,280
But my favorite dial/layout/font/numerals in this era is this 4992B for the British and Canadian Air Force Pilots.

Hacks/Pendant set/Sweep red seconds hand
Circa 1942
Edited:
 
Posts
20
Likes
47
Laminor, according to Mikrolisk. Please show us what is inside the case. Your watch is much newer than 1907, according to the information on Mikrolisk. More like 1920s to early 1930s.


Ok, thanks for checking. All I know is what a jeweler told me about 10 years ago. He opened the back cover then took off the cover to look at the movement and.he said someone had engraved 07 on the inside of the movement cover. He thought that was a potential service date. There is some manufacturer’s information engraved on the back cover, I’ll get a pic of that and post it later today. That has what looks to be a serial number, maybe model number. That should help. I donn’t feel competent enough to take off the movement cover and look.
 
Posts
20
Likes
47
Laminor, according to Mikrolisk. Please show us what is inside the case. Your watch is much newer than 1907, according to the information on Mikrolisk. More like 1920s to early 1930s.


This is a pic from inside the outer back cover, not the cover of the movement. Thanks for you help.
 
Posts
14,275
Likes
41,131
A picture of the mechanism, please. Companies who made watch movements usually did NOT make watch CASES. Your attempt at showing us a greatly enlarged photo of the markings in the case back only tells me that the case might have been made in Germany. But it doesn’t tell who made your watch.
 
Posts
20
Likes
47
It’s a Laminor watch. I don’t have the necessary tools to remove the movement cover to check the movement and I’m not sure I’d want to try if I did. When I find someone to work on it, I’ll get a pic and post it.
 
Posts
14,275
Likes
41,131
In case you thought the name Laminor would help us tell you any more about your watch than what was discovered in the Mikrolisk information, you’re wrong! Whoever owned the Laminor name took a movement, dial, hands, and case off the shelf, printed Laminor on the dial, assembled it, and sold it. It is a generic watch! There was nothing in or on the watch that originated with the firm who owned the Laminor name. So don’t tell us the name Laminor again, please. That name is next to meaningless. Show us better pictures of the markings in the case back, AND A PICTURE OF THE MECHANISM!
 
Posts
16,722
Likes
151,512
Day or night 😀

 
Posts
4,869
Likes
14,688
Anyone seen these pocket watch cameras before? I spotted this on Facebook

 
Posts
4,869
Likes
14,688
No, that's a cool concept though.

It’s on my Christmas wish list, along with a telegraph sounder

 
Posts
605
Likes
2,001
The silver marks seem to indicate London 1834 for the main case and 1833 for the bow support which probably means made early 1834 but I have been unable to find out the maker, the dial indicates J. T. Cundall about whom I can find no info, are they the retailer or the maker? No idea.

The case maker / sponsor either James Dow or Joseph Dewin.



The dial signature is likely a retailer.
 
Posts
16,722
Likes
151,512
Elgin in use today,

 
Posts
14,275
Likes
41,131
The very watch that was the first watch I ever “collected” and added to a (then) modest collection. This was about 45 years ago. This is a Keystone Howard series V (5) from circa 1908. Double sunk 24-hour vitreous enamel Montgomery dial, 19-jewels, lever set, original Crescent Watch Case Co. case marked Howard Watch Co., Boston. The Keystone watch case co. bought the rights to use the Howard name on watches after the death of Edward Howard. E. Howard & Co. still existed, but Keystone was obliged the use the Howard Watch Co. on their watches to distinguish that they were a separate company. I now have 7 Keystone Howards and one E Howard in my collection.
Notice the @Duracuir1 leather lanyard.