- Posts
- 3,211
- Likes
- 7,650
bgrisso
ยทI have spent several years and over $1k USD amassing this collection of UG parts. I would like to sell bulk lot at my cost of $1k USD. I will cover shipping conus, intl at buyers cost.
First starting with the box featuring cases, case backs, some dials and mvmts, starting from upper left....
1) Universal Geneve 20101 SS case 32.5mm (should fit caliber 264 movement). Includes caseback and movement retaining ring, in very good condition, looks unpolished
2) Universal Geneve 20507 SS case 33mm (should fit caliber 2647movement). Includes caseback, crystal, stem, crown, in very good condition, looks unpolished
3) Universal Geneve 20724 SS case 32.5mm (should fit caliber 2643movement). Includes caseback, in good condition, looks unpolished
4) Universal Geneve SS midcase 31mm. Since this is missing the caseback I cannot be sure, but I believe this is a reference 20889 and should fit caliber 2641movement).
5) Universal Geneve 406508-3 gold plated case (some plating loss) 31.5mm and caliber 332 movement. This reference was used to create map dials of the middle east. The caseback has arabic writing, and it appears a blank gold dial is present, without the map graphics and dial printing added. The movement winds and the balance starts swinging for a little bit and stops, assume it needs a full service. There is some rust on the ratchet wheel.
6) Universal Geneve 2579909 14K gold filled case case 34.5mm (should fit caliber 138 movement). Some plating loss and scratches on the caseback. Includes a dial without any printing, not sure if it's original or redone.
7) Universal Geneve 21264 SS case 35mm, with caliber 262 movement, original dial and crown. Movement is running, however I assume it
needs a full service. This watch is complete except for a set of hands, and the case is in good condition, looks unpolished.
8) Universal Geneve 20503 caseback, I think this is for a caliber 267 case
9) Universal Geneve 20724 caseback, I think this is for a caliber 263 case
10) Universal Geneve 21302 caseback, I think this is for a caliber 291 calendar case
11) Universal Geneve 572101 caseback, not sure what this is for
12) Universal Geneve Jumbo dial, hands, and movement retaining ring. The dial is 34.3mm, champagne, with applied gold numbers. Gold dauphine hour and minute hands, with sub second stick hand. Dial is original printing, with some patina, still attractive and very usable.
Next are three boxes of various parts........
CALIBER - Description
08 - movement, hands, dial, crown. Movement winds and balance is running.
09 - movement, parts, not running, some rust
09 - dial and hands
09 - dial, hands, movement, crown, movement not running, some rust
24 - parts
25 - NOS parts
27 - parts
42 - dial, hands, movement, crown. Movement winds and balance is running.
66/67 - parts and NOS parts
71/72 - NOS parts
71/72 - NOS parts
125 - parts
128 - dial and movement. Dial is missing some markers. Balance is swinging.
139 - looks like mostly complete movement, balance is swinging
139 - parts
217 - NOS parts
218-97 - dial, hands, crown, microrotor movement. Balance is removed and in separate bag, looks pretty complete otherwise.
219 - parts
220 - parts
231 - looks like at least two movements, partially disassembled, with crowns
240 - stem
243 - parts
244 - parts
258 - parts
262 - parts
262 - movement, looks clean and complete, balance swinging
262 - partial movement, balance not swinging
262 - movement, looks clean and complete, balance swinging
263 - dial (pretty rough), hour/minute hands (missing lume), movement looks clean and complete, balance swinging
263 - dial (pretty rough), movement looks complete and mostly clean, some rust, balance moving but not swinging
264 - parts
264 - partial movement
264 - looks like complete movement and crown, rust on the crown wheel, balance swinging freely
264 - black dial, I think it's a reprint
265 - parts
267 - partial movement
267G - partial movement (no balance)
267 - dial, I think it's a reprint
267 - dial, I think it's a reprint
330 - dial, hour/minute hands (no small seconds hand), movement retaining ring, movement, crown - winds and balance is swinging
332 - dial, hands, movement retaining ring, movement - balance is swinging freely
332 - stems, parts
360 - parts
402 - dial, hands, movement, crown, winds and balance is swinging
800 - parts
1200 - dial, some large areas of staining
Unknown - rectangular dial and hands
Unknown - round dial
Unknown - round dial
Unknown - base plates
Unknown - NOS parts
Unknown - parts
Unknown - parts
Unknown - NOS parts
281 - clutch wheel, used
283 - stems, parts
285 - bridge and stem
287 - parts
291 - parts
Pusher - gold color square chrono pusher
Stems - many different types stems
Crown - 8 crowns, some stems, mix of SS and gold tone, nothing signed
Mvmt Retaining ring x1
Dust covers x2
NOS Mainsprings - cal 281 x2, cal 267, cal 583, cal 09
Last is a container of mixed chronograph parts, I'm not familiar enough to know the caliber or part name offhand....
First starting with the box featuring cases, case backs, some dials and mvmts, starting from upper left....
1) Universal Geneve 20101 SS case 32.5mm (should fit caliber 264 movement). Includes caseback and movement retaining ring, in very good condition, looks unpolished
2) Universal Geneve 20507 SS case 33mm (should fit caliber 2647movement). Includes caseback, crystal, stem, crown, in very good condition, looks unpolished
3) Universal Geneve 20724 SS case 32.5mm (should fit caliber 2643movement). Includes caseback, in good condition, looks unpolished
4) Universal Geneve SS midcase 31mm. Since this is missing the caseback I cannot be sure, but I believe this is a reference 20889 and should fit caliber 2641movement).
5) Universal Geneve 406508-3 gold plated case (some plating loss) 31.5mm and caliber 332 movement. This reference was used to create map dials of the middle east. The caseback has arabic writing, and it appears a blank gold dial is present, without the map graphics and dial printing added. The movement winds and the balance starts swinging for a little bit and stops, assume it needs a full service. There is some rust on the ratchet wheel.
6) Universal Geneve 2579909 14K gold filled case case 34.5mm (should fit caliber 138 movement). Some plating loss and scratches on the caseback. Includes a dial without any printing, not sure if it's original or redone.
7) Universal Geneve 21264 SS case 35mm, with caliber 262 movement, original dial and crown. Movement is running, however I assume it
needs a full service. This watch is complete except for a set of hands, and the case is in good condition, looks unpolished.
8) Universal Geneve 20503 caseback, I think this is for a caliber 267 case
9) Universal Geneve 20724 caseback, I think this is for a caliber 263 case
10) Universal Geneve 21302 caseback, I think this is for a caliber 291 calendar case
11) Universal Geneve 572101 caseback, not sure what this is for
12) Universal Geneve Jumbo dial, hands, and movement retaining ring. The dial is 34.3mm, champagne, with applied gold numbers. Gold dauphine hour and minute hands, with sub second stick hand. Dial is original printing, with some patina, still attractive and very usable.
Next are three boxes of various parts........
CALIBER - Description
08 - movement, hands, dial, crown. Movement winds and balance is running.
09 - movement, parts, not running, some rust
09 - dial and hands
09 - dial, hands, movement, crown, movement not running, some rust
24 - parts
25 - NOS parts
27 - parts
42 - dial, hands, movement, crown. Movement winds and balance is running.
66/67 - parts and NOS parts
71/72 - NOS parts
71/72 - NOS parts
125 - parts
128 - dial and movement. Dial is missing some markers. Balance is swinging.
139 - looks like mostly complete movement, balance is swinging
139 - parts
217 - NOS parts
218-97 - dial, hands, crown, microrotor movement. Balance is removed and in separate bag, looks pretty complete otherwise.
219 - parts
220 - parts
231 - looks like at least two movements, partially disassembled, with crowns
240 - stem
243 - parts
244 - parts
258 - parts
262 - parts
262 - movement, looks clean and complete, balance swinging
262 - partial movement, balance not swinging
262 - movement, looks clean and complete, balance swinging
263 - dial (pretty rough), hour/minute hands (missing lume), movement looks clean and complete, balance swinging
263 - dial (pretty rough), movement looks complete and mostly clean, some rust, balance moving but not swinging
264 - parts
264 - partial movement
264 - looks like complete movement and crown, rust on the crown wheel, balance swinging freely
264 - black dial, I think it's a reprint
265 - parts
267 - partial movement
267G - partial movement (no balance)
267 - dial, I think it's a reprint
267 - dial, I think it's a reprint
330 - dial, hour/minute hands (no small seconds hand), movement retaining ring, movement, crown - winds and balance is swinging
332 - dial, hands, movement retaining ring, movement - balance is swinging freely
332 - stems, parts
360 - parts
402 - dial, hands, movement, crown, winds and balance is swinging
800 - parts
1200 - dial, some large areas of staining
Unknown - rectangular dial and hands
Unknown - round dial
Unknown - round dial
Unknown - base plates
Unknown - NOS parts
Unknown - parts
Unknown - parts
Unknown - NOS parts
281 - clutch wheel, used
283 - stems, parts
285 - bridge and stem
287 - parts
291 - parts
Pusher - gold color square chrono pusher
Stems - many different types stems
Crown - 8 crowns, some stems, mix of SS and gold tone, nothing signed
Mvmt Retaining ring x1
Dust covers x2
NOS Mainsprings - cal 281 x2, cal 267, cal 583, cal 09
Last is a container of mixed chronograph parts, I'm not familiar enough to know the caliber or part name offhand....
Edited by a mod:
