Benrus Ultra Deep

Posts
1,056
Likes
5,569
Last month my Eterna Kontiki super IDF had a winding issue after service. The crown slipped every so often when hand winded. the watchmaker gave up on it and gave me a refund. So talked to Jack at IWW who I knew worked on these he said sounded like the crown had to buy a used crown off eBay for 100 bucks. So had to send it in the mail like doing local stuff don't get lost that way. So, I saw this remake Benrus Ultra Deep and was thinking maybe a modern watch with a vintage vibe so I can wear the vintage stuff once in a while less wear and tear and these vintage watches we collect are not cheap anymore and watchmakers and parts are getting tougher to find. So I kept going back looking at the Ultra Deep at the Benrus website then they have a sale going on now 20% off that's 200 off so pulled the trigger. Same case size at the vintage one, dome acrylic crystal with date window has a soprod P024 25 jewel hacking automatic movement a few more jewels than the original that had 17 jewels. The case is different has a screw down crown. It does take the vintage itch away when I wear it.
 
Posts
1,056
Likes
5,569
Plus 1200 or more cheaper than a vintage one. In the old days the vintage ones were cheaper than the remakes.
 
Posts
16,307
Likes
44,936
Plus 1200 or more cheaper than a vintage one. In the old days the vintage ones were cheaper than the remakes.

Not by that much, they have been trading in the $1.3-1.8k range lately. This is in the same vein as the Nivada reissues- really well done and almost 1:1, but prices are not far off from vintage so if you are a vintage guy, it’s a hard sell. If you are a vintage-vibe guy but don’t want to deal with the hassle then it’s a no brainer- swing away.
 
Posts
1,056
Likes
5,569
Not by that much, they have been trading in the $1.3-1.8k range lately. This is in the same vein as the Nivada reissues- really well done and almost 1:1, but prices are not far off from vintage so if you are a vintage guy, it’s a hard sell. If you are a vintage-vibe guy but don’t want to deal with the hassle then it’s a no brainer- swing away.
I was checking prices on eBay there all ways higher than the forums most of the time.
 
Posts
1,056
Likes
5,569
One thing you can't do with most vintage divers is use it as a diver watch in the water. Most vintage compressors since none screw down crown, I would avoid water. The remake can reach 660 FT without leaking if you want to use the watch as intended. Use to own a vintage Wittnauer Super Compressor same case size but felt lighter than this newer Benrus. Were the vintage compressor solid steel cases?
Edited:
 
Posts
16,307
Likes
44,936
One thing you can't do with most vintage divers is use it as a diver watch in the water. Most vintage compressors since none screw down crown, I would avoid water. The remake can reach 660 FT without leaking if you want to use the watch as intended. Use to own a vintage Wittnauer Super Compressor same case size but felt lighter than this newer Benrus. Were the vintage compressor solid steel cases?
100% The EPSA cases weren’t great at their intended purpose. The sad state of many speak to that.
 
Posts
6,525
Likes
26,480
I was checking prices on eBay there all ways higher than the forums most of the time.
And there is actually one available in the dealer section of our forum at £1,050. It has an aftermarket time setting crown but is in otherwise really good condition.



That said, I do really like the modern reissue and could easily consider that a successfully scratched itch. They did a good job staying pretty much true to the original.