- Posts
- 1,047
- Likes
- 4,455
apsm100
··Noob taxpayerHello OF,
Up for sale is my all original, late 50's, stainless steel, Dennison cased, Omega ref. 13332 with a manual-wind cal. 267.
These were made for the UK market and are not seen very often in North America.
The Dial
This piece features an Arabic numeral dial with alpha hands and a sub-seconds dial. The dial is evenly patinaed with an orangey tint and is dynamic in different lighting conditions. The indices are clean and contrast the body of the dial.
The Case
The stainless steel case, which has a diameter of 34mm not including the crown and a lug width of 18mm, is in good condition and maintains sharp lines and facets; the case sides maintain a brushed finish.
The caseback is missing its brushed finish due to polishing.
The crystal has been worn but is missing the engraved Omega logo to the center so I believe it to be an older replacement; although the low dome is nice.
The crown is original to the piece.
Note: There is some minor pitting between the lugs and on the bottom right and left lug.
Movement
I do not have movement photos as I cannot reach my watchmaker at the moment.
I would recommend a service if you are planning to wear it daily as time-setting feels a bit sluggish.
Winding feels great and it maintains a strong power reserve (around 40 hours) with great time keeping (around +5 seconds per day).
Terms
I am asking $430USD + shipping, head-only, shipped and insured via Flagship or FTF in Surrey, B.C., Canada.
Payment via EMT (within Canada) or PP Friends.
I have bought and sold watches a few watches here on OF and a few dozen on eBay for many years under username apsm100 with 100% feedback.
If you have any questions let me know.
Thank you OF!
Amrit
Up for sale is my all original, late 50's, stainless steel, Dennison cased, Omega ref. 13332 with a manual-wind cal. 267.
These were made for the UK market and are not seen very often in North America.
The Dial
This piece features an Arabic numeral dial with alpha hands and a sub-seconds dial. The dial is evenly patinaed with an orangey tint and is dynamic in different lighting conditions. The indices are clean and contrast the body of the dial.
The Case
The stainless steel case, which has a diameter of 34mm not including the crown and a lug width of 18mm, is in good condition and maintains sharp lines and facets; the case sides maintain a brushed finish.
The caseback is missing its brushed finish due to polishing.
The crystal has been worn but is missing the engraved Omega logo to the center so I believe it to be an older replacement; although the low dome is nice.
The crown is original to the piece.
Note: There is some minor pitting between the lugs and on the bottom right and left lug.
Movement
I do not have movement photos as I cannot reach my watchmaker at the moment.
I would recommend a service if you are planning to wear it daily as time-setting feels a bit sluggish.
Winding feels great and it maintains a strong power reserve (around 40 hours) with great time keeping (around +5 seconds per day).
Terms
I am asking $430USD + shipping, head-only, shipped and insured via Flagship or FTF in Surrey, B.C., Canada.
Payment via EMT (within Canada) or PP Friends.
I have bought and sold watches a few watches here on OF and a few dozen on eBay for many years under username apsm100 with 100% feedback.
If you have any questions let me know.
Thank you OF!
Amrit
Edited:
